manualshive.com logo in svg

TPS 125190, Handbook, Page: 26 / 35

Share
Download
TPS 125190 Handbook Download Page 26

 

Page 26

9. RS232 Port 

This section is applicable if the optional RS232 port is fitted. 

9.1 RS232 Protocol 

The 

WP-89

 RS232 configuration is 8 bits, No Parity, 1 Stop Bit, XON/XOFF 

Protocol. The baud rate is fixed at 4800. 

9.2 Sending Readings to the RS232 Port 

Press 

 to instantly send readings to the RS232 port whenever the 

WP-89

 is in 

normal measurement mode. 

Records can be sent directly to the RS232 port rather than stored in memory 
during automatic datalogging. See section 8 for details. 

9.3 Communication and Statistical Software 

Communication between the 

WP-89

 and a PC can be handled with any RS232 

communication software. WinTPS Communication software for Windows™ 95, 
98 and ME is optionally available (Part No 130086). 

Once the data is saved to disk, the next problem is how to use it. The data is 
formatted in columns that can be imported by programs such as Microsoft

®

 

Excel

®

 and Lotus 123

®

. 

Information on how to use the software is provided in the WinTPS manual on the 
WinTPS CD-ROM. 

Summary of Contents for 125190




































Reviews:

No comments