Introduction
Thank you for purchasing TPI brand products. The TPI 716 Flue Gas
Analyser is a state of the art, easy to use analyser designed not only to
display and calculate the required readings from a flue but also to cover
most of the other measurements associated with combustion. The
instrument is ruggedly constructed and comes with a 6 Year Guarantee
subject to annual servicing being carried out by TPI or one of their
approved service centres.
General Overview
The following guidelines will help prevent damage to your sensors:
Always
use the mini pump filter when testing flue gases.
Periodically check and replace the mini pump filter as needed.
Always
make sure the in-line filter / water trap is installed properly.
Periodically check and replace the in-line filter as needed.
Always
remove water or condensation from the inside of the in-line
filter / water trap assembly prior to performing tests.
Always
use the optional oil filter (p/n A773) when performing tests on oil
burning equipment
unless you are using the 716 with an NO
sensor fitted. Do not use the A773 on the 716 with NO sensor fitted
because the A773 will filter out Nitric Oxide (NO).
Never over saturate your sensors by performing tests on equipment with
gas levels beyond the capability of you analyser.
Always
keep the A796 water trap / filter assembly clean & dry and replace
the internal filter as necessary. (Replacement filter part number is A796-F.)
1
www.
GlobalTestSupply
.com
Find Quality Products Online at:
