Menu Navigation - Analyser Setup
1. From the main menu use the Arrow keys to select “Analyser Setup” and press the
“Enter” key (center blue soft key).
2. The Analyser Setup menu will display. The following parameters are accessible in
this menu. Use the Arrow keys and center blue soft key to select the
appropriate parameter.
Display type
- Allows the display to be switched between 8 line and 4 line.
Date / Time
- Used to set the current date and time. The date is in dd:mm:yyyy format
and the time is a 24 hour clock.
Contrast
- Lighten or darken the display contrast.
Backlight
- Adjust the backlight level from off to full brightness or set it to auto and the
716’s internal sensor will control the backlight brightness depending on ambient light.
Alarm limits
- Set the level at which the CO alarms sounds.
Print Header
- Enables the two line header on printouts sent to the infrared printer to
be set with your companies information. After pressing “Enter” you will be asked for a
password. Enter “
7160
” and press “OK”. Select Header Line 1 by pressing the centre
blue soft key “Enter”. Use the Up/Down Arrow & Left/Right Blue Soft Keys to move to
the required character then press the centre blue soft key “Enter” to choose this
character. Repeat this process until the required details are displayed in the top box.
Use the Up Arrow Key to have the cursor enter the top box and “Save” will appear as
the Centre Blue Soft Key. Choosing “Save” records the information to memory and
returns you to the “Printer Setting” screen. Highlight “Header Line2” by using the
Down arrow Key and repeat the process for line 2 of the header.
Auto Power
- Enables the auto power off time to be set. The timer can be disabled or
set to one of the following times; 5, 10, 20, 30, or 60 minutes. If a key has not been
pressed during the time set, the analyser will automatically begin to turn off.
Memory
- Enables memory maintenance as outlined on page 25.
27
www.
GlobalTestSupply
.com
Find Quality Products Online at: