Introduction
Thank you for purchasing TPI brand products. The TPI 717 combus-
tion analyzer is a state of the art, easy to use analyzer designed not
only to display and calculate the required readings from a flue but also
to cover most of the other measurements associated with combustion.
The instrument is ruggedly constructed and comes with a 3 Year unit
and 2 Year sensor Guarantee.
General Overview
The TPI 717 combustion analyzer uses field replaceable state of the art
electrochemical sensors. This sensor technology provides the longest
lasting, most accurate and reliable means for performing combustion
tests. The sensors in your analyzer will need to be replaced periodically
and calibration is recommended once every year.
Electrochemical sensors by nature are always active. Therefore the
time the analyzer is off and not being used must be taken into account
when determining sensor life. The sensors in your analyzer are war-
ranted for two years. This warranty does not cover sensors damaged
through misuse of the analyzer.
You should keep the batteries of your 717 fresh so power is constantly
being supplied to your sensors.
The following guidelines will help prevent damage to your sensors:
Always use the mini pump filter when testing flue gases.
Always periodically check and replace the mini pump filter as needed.
Always make sure the in-line filter / water trap is installed properly.
Always periodically check and replace the in-line filter as needed.
Always remove water or condensation from the inside of the in-line fil-
ter / water trap assembly prior to performing tests.
Always use the optional oil filter (p/n A773) when performing tests on
oil burning equipment.
1
www.
.com
1.800.561.8187
