7. PRINTING DATA
WARNING: -
To operate correctly there must be a clear line of sight between the
Infrared Window on the instrument (see 2.3) and the Infrared Window on the IR
Printer (see Printer instructions)
1. Press
the
Print/COM Key
once
and the following screen will be
displayed.
‘rEAL’
will be flashing.
If you wish to Print Out previously Stored
(Stor)
or
Tightness Test
(tItn)
or CO Build Up Test
(S-L9)
Readings then press the
Down Arrow Key
to have
‘Stor’
,
‘tItn’
or
‘S-L9’
flashing rather than
‘rEAL’
2.
Press the
Scroll/Enter Key
once
and if you have chosen to print out
Real Time
(rEAL)
readings then the
‘Print Out’
screen (below left) will be
displayed and the Real Time
(rEAL)
readings
will be sent to the printer.
However if you have chosen to print either
Stored
(Stor)
or Tightness Test
(tItn)
or CO
Build Up Test
(S-L9)
Readings then
‘Addr’
will be displayed and a location number will
be flashing.
Select the required address location that
you wish to review the saved data from
by pressing the Up and Down
Arrow Keys
3. Press
the
Scroll/Enter Key .
The
‘Print Out’
screen (above left) is
displayed and the selected readings will be sent to the printer.
4. Once the selected data has been sent to the IR printer
“End YES”
with
“YES”
flashing will be displayed. Should
you not wish to print any further stored data then press the
Scroll/Enter Key
once to Exit and be returned to the
screen you were originally on.
5. However if you wish to continue and review another set of readings then
press the
Up Arrow Key
so that
“no”
is flashing.
6.
Press the
Scroll/Enter Key
once and repeat
.
