5. SAVING DATA
In addition to the CO Build Up Test & the Tightness Test it is also possible to save
complete combustion readings, temperature and single pressure readings as
follows:-
1.
Have the 712 analyser set to the relevant screen for the readings that you
wish to save (i.e. Any of the combustion screens (see 4.1) for combustion
readings or pressure screen (see 4.3.1) for single pressure reading)
2. Press
the
Store/Logger Key
once and
‘Stor’
will be displayed on
the screen.
3.
Press the
Scroll/Enter Key
once.
‘Addr’
will be
displayed and a location number (0 to 49) will be
flashing on the screen.
4.
Select the required address location that you wish to
save the data to by pressing the
Up and
Down Arrow Keys
**Please Note:- Choosing the same Address Location on which previously
Stored Data is being held will
OVERWRITE
the previous readings with the
New Stored Data. This will be the case regardless of the particular readings
you are attempting to save (i.e. should you have Combustion Readings stored
at Address 1 and you Save Temperature Readings to Address 1 then the
Previous Combustion Readings will be overwritten with the New Temperature
Readings) and the previously Stored Readings will not be retrievable.
5. Press
the
Scroll/Enter Key
once and
the readings
will be stored to the location that was chosen in step 3
and
“End yES”
with
“yES”
flashing will be displayed
6. If you do not wish to save any further readings at this
moment press the
Scroll/Enter Key
and you will
be returned to the screen you were originally on.
7.
However if you wish to continue and save another set of readings then
press the
Up Arrow Key
so that
“no”
is flashing and press the
Scroll/Enter Key.
The information that you just stored can be either be Reviewed on the screen
(see 6), Printed to a compatible IR Printer (see 7) or Downloaded to a compatible
PC (see 9)
