TP UP-PN24S, User Manual

Page: 4 / 25

４
1.5 Printing Control Commands
The UP-PN provide 42 commands include ESC/POS commands
、
FS
Chinese print control commands
、
and GS Black Mark control commands.
•
Character dot graphics printing commands
ESC/P provide the functions as:
Enable printing characters and dot graphics
、
enlarge characters
、
underline
characters
、
user-defined characters printing
、
formatting
、
hexadecimal
dumping.
•
Chinese characters printing commands
FS commands support the GB level 1 and level 2 Chinese font
、
Roman
、
and
tabs. Refer to the chapter 3 p rinting control commands.
•
GS FF Black Mark detecting command
Detect the Black Mark and feed paper to the beginning of next paper.
1.6 Interface
TP UP-PN provides both interfaces of RS-232 serial port and IrDA infrared
port .
•
RS-232 Serial port
Baud rate: 9600bps
Handshaking: RTS/CTS
Data format: 8-bit data, none parity, 1-bit stop
Connector: 6 pin RJ-11 modular jack
Signal level: EIA level ±3
～
±15V
•
IrDA infrared port
Communication distance: 1m(max.)
Communication angle: 30
1.7 Power Supply
•
DC 6V 1500mAh rechargeable battery pack.
•
Battery slowly charging on printer with external DC9
～
12V/300mA adaptor
•
Battery fast charging on CX-101 quick charger (option)
５
1.8 Power On and Off Automatically
•
Press button “On” for printer power on
•
Power off automatically for 60 seconds no operations or press and keep the
button ON for 5 seconds.
1.9 Black Mark Detecting
•
Black mark should be printed on printing side close edge left with a height
5mm and width 15mm
；
•
Reflectivity of black mark should be less than 10% and the others should be
more than 75%.
1.10 Operation Environment
•
Temperature: 0~50
℃
•
Humidity: 10~80%RH
1.11 Overall dimension
•
153(L)
×
116(W)
×
65(H)mm
1.12 Weight
•
530g(excluding paper roll)