28
Chapter 4
Configure the Router
1
Visit
http://tplinkwifi.net
, and log in with the username and
password you set for the router.
2
Go to
Wireless
>
Wireless MAC Filtering
.
3
Click
Enable
to enable the Wireless MAC Filtering function.
4
Select
Allow the stations specified by any enabled entries in
the list to access
as the filtering rule.
5
Delete or disable all entries if there are any entries already.
6
Click
Add New
and fill in the blanks.
1 ) Enter the MAC address 00-0A-EB-B0-00-0B/00-0A-EB-
00-07-5F in the MAC Address field.
2 ) Enter wireless client A/B in the Description field.
3 ) Leave the status as
Enabled
.
4 ) Click
Save
and click
Back
.
7
The configured filtering rules should be listed as the picture
shows below.
Now only client A and client B can access your network.
4 3 5 Wireless Advanced
1. Visit
http://tplinkwifi.net
, and log in with the username and password you set for the
router.
2. Go to
Wireless
>
Wireless Advanced
.
3. Configure the advanced settings of your wireless network and click
Save
.
Note:
•
If you are not familiar with the setting items on this page, it’s strongly recommended to keep the provided
default values; otherwise it may result in lower wireless network performance.
How can I
do that?
Done!
