50
Chapter 2 .
Configure Touch P5 as a Router
2. 21 IPv6 Connection
If your ISP provides IPv6 connection and has provided some detailed IPv6 parameters, you can configure your Touch P5 to
permit IPv6 connection.
1. Visit
http://tplinkwifi.net/
, and log in with the username and password you set for your Touch P5.
2. Go to
Advanced
>
IPv6
to enable IPv6 connection.
3. Select the Internet connection type provided by ISP. Fill in information as required by different connection type.
Note:
If you do not know what your Internet connection type is, contact your ISP or judge according to the information
provided by your ISP.
1 )
Static IP
: Fill in blanks and click
Save
.
2 )
Dynamic IP
: Click
Advanced
to have more configuration if ISP requires. Click
Save
.
3 )
PPPoE
: Fill in the Username and Password. Click
Advanced
to have more configuration if ISP requires. Click
Save
.
4 )
6to4 Tunnel
: An IPv4 Internet connection type is a prerequisite for this connection type. Click
Advanced
to have
more configuration if ISP requires. Click
Save
.
5 )
Pass-Through (Bridge)
: Click
Save
and skip to Step 5.
4. Configure LAN ports. Windows users are recommended to choose from the first two types. Fill in
Address Prefix
provided
by ISP, and click
Save
.
Note:
Find Help on the management interface to know more about items.
