TL-WR941N/TL-WR941ND
Wireless N Router
Figure 4-55 Static Routing
To add static routing entries:
1. Click
Add New…
shown in Figure 4-55, you will see the following screen.
Figure 4-56 Add or Modify a Static Route Entry
2. Enter the following data:
¾
Destination IP Address
-
The
Destination IP Address
is the address of the network or
host that you want to assign to a static route.
¾
Subnet Mask
-
The
Subnet Mask
determines which portion of an IP Address is the
network portion, and which portion is the host portion.
¾
Gateway
-
This is the IP Address of the gateway device that allows for contact between
the Router and the network or host.
3. Select
Enabled
or
Disabled
for this entry on the
Status
pull-down list.
4. Click
the
Save
button to make the entry take effect.
Other configurations for the entries:
Click the
Delete
button to delete the entry.
Click the
Enable All
button to enable all the entries.
Click the
Disable All
button to disable all the entries.
Click the
Delete All
button to delete all the entries.
-69-
