TL-WR941N/TL-WR941ND
Wireless N Router
The QSS Configuration Screen of Wireless Adapter
II. By
PIN
If the new device supports Wi-Fi Protected Setup and the PIN method, you can add it to the
network by PIN with the following two methods.
Method One:
Enter the PIN into my Router
Step 1: Keep the default QSS Status as
Enabled
and click the
Add device
button in Figure 4-2,
then the following screen will appear.
Step 2: Choose
Enter the new device's PIN
and enter the PIN code of the wireless adapter in
the field behind
PIN
in the above figure. Then click
Connect.
)
Note:
The PIN code of the adapter is always displayed on the QSS configuration screen
Step 3: For the configuration of the wireless adapter, please choose
Enter a PIN into my access
point or a registrar
in the
configuration utility of the QSS as below, and click
Next.
-21-
