TL-WDR3500
N600 Wireless Dual Band Router
- 58 -
Access Time
- During this time the wireless stations could accessing the AP.
Note:
The range of bandwidth for Guest Network is calculated according to the setting of Bandwidth
Control on the page “Bandwidth Control->Control Settings”.
4.8.2
Storage Sharing
Choose menu “
Guest Network
→
Storage Sharing
”, you can configure the Guest Network
Storage Sharing on the page as shown in Figure 4-45. When a share folder is added, you can
view its display name, volume partition, folder path and you can delete the share folder by clicking
the
Delete
button.
Figure 4-45 Guest Network Storage Sharing
User Name
- The user name is guest for Guest Network, which can't be changed.
Password
- Enter the password in the Password field. The password must be composed of
alphanumeric symbols not exceeding 15 characters in length.
Confirm Password
- Re-enter the password here.
Storage Authority
- Authority of user: Read Only or Read and Write.
Name
- This folder's display name.
Partition
- The volume that the folder resides. Volume 1-8 is mapping to USB port 1, Volume
9-16 is mapping to USB port 2.
Folder
- The real full path of the specified folder.
You can edit the share folder by clicking
Edit
.
You can delete the share folder by clicking
Delete
.
Follow the instructions below to set up your Guest Network Storage Sharing:
1. Plug an external USB hard disk drive or USB flash drive into this Router.
2. Make sure the Service Status on the page “USB Settings -> Storage Sharing” is
Started
.
