TP-Link TL-SL2210WEB, User Manual

Page: 38 / 64

31
Gigabit Uplink Web Smart Switch
Port Parameter 511111C
This page contains the following fields:
Port Parameter Figure 6-22
Port Status:
¾
Indicates whether the port is operational or non-operational. "Enable"
indicates the port is operational and "Disable" indicates the port is non-operational.
If a port is unused for a long time, it can be set to be non-operational to cut down
energy costs.
Note: You can't manage the switch via the port, which is non-operational. Please set
the value of the management port to be “enable”.
Port Security:
¾
"Enable" indicates the port will not learn new MAC address and only
transmits the frames from the MAC address it has learned. "Disable" indicates it will
learn new MAC address.
Caution: If you haven’t set the static MAC address, you can't enable all of the port
security, which will result in an inability to manage the switch.
Flow Control:
¾
Indicates whether the flow control is enabled or disabled.
Duplex Mode:
¾
Possible field values are Auto, 10Mbps HD, 10Mbps FD, 100Mbps
HD, 100Mbps FD and 1000Mbps FD (Giga port support1, "HD" stands for halfduplex
and "FD" stands for full-duplex. “Auto” means auto negotiation.
Further explanation:
By operating on fields in the All Ports line expediently, you can set the values of all
■
ports in the corresponding field. Some other setting pages offer the same function.
Parameters of Trunk member ports are configured with default value (see the
■
Appendix B table1 and cannot be configured here (see port 5 and 6 in the Figure
6-22 for example1. For SFP, the Duplex Mode is set to “1000Mbps FD” and cannot be
modified.
Web Management