TP-Link TL-SL2210WEB, User Manual

Page: 14 / 64

07
Gigabit Uplink Web Smart Switch
Keep the device far from high-frequency, strong-current devices, such as radio
■
transmitting station.
Use electromagnetic shielding when necessary.
■
Lightening Protection
1 3 5 7 2 4 6 8 GIGA SFP
10/100Mbps 10/100/1000Mbps 1000Mbps
1 2 3 4 5 6 7 8
TL-SL2210WEB
RESET
8+2G Web-Smart Switch
Power
100M
Link
Act
System 1000M
GIGA
Link/Act
Link/Act
R
Extremely high voltage currents can be produced instantly when lightning occurs and the air
in the electric discharge path can be instantly heated up to 20,000
℃
. As this instant current
is strong enough to damage electronic devices, more effective lightning protection measures
should be taken.
Ensure the rack and device are well earthed.
■
Make sure the power socket has a good contact with the ground.
■
Keep a reasonable cabling system and avoid induced lightning.
■
Use the signal SPD (Surge Protective Device1 when wiring outdoor.
■
Note: For detailed lightning protection measures, please refer to Chapter 3
Lightning Protection.
Installation Site
S
1 3 5 7 2 4 6 8 GIGA SFP
10/100Mbps 10/100/1000Mbps 1000Mbps
1 2 3 4 5 6 7 8
TL-SL2210WEB
RESET
8+2G Web-Smart Switch
Power
100M
Link
Act
System 1000M
GIGA
Link/Act
Link/Act
R
When installing the device on a rack or a flat workbench, please note the following
items:
The rack or workbench is flat and stable, and sturdy enough to support the weight
■
of 5.5kg at least.
The rack or workbench has a good ventilation system. The equipment room is well
■
ventilated.
The rack is well grounded. Keep the power socket less than 1.5 meters away from
■
the device.
Installation