4
2.3 Power On
TL-SG1016/TL-SG1024 16/24-port Gigabit Ethernet Switch is
powered by AC power supply. Powering on the Switch, it will
automatically initialize and its LED indicators should respond as
follows:
1
）
All of the Link/Act and 1000Mbps LED indicators will
fl
ash
momentarily for one second, which represent a resetting of
the system.
2
）
The Power indicator will light up.
If the LED indicators don't respond as described above, please
check the power supply and connection.
Chapter 3
Identifying External Components
This Chapter describes the front panel, rear panel and LED
indicators of the Switch. TL-SG1016 and TL-SG1024 just differ
in the number of LED indicators and ports and all
fi
gures in this
guide are of TL-SG1024.
3.1 Front Panel
The front panel of the TL-SG1024 consists of switch LED
indicators, 24 10/100/1000Mbps RJ-45 ports.
Figure 3-1 TL-SG1024 Switch Front Panel sketch
3.2 Rear Panel
The rear panel of the TL-SG1024 only features a power
receptacle, which is an AC power receptacle. Connect the
female of the power cord head here, and the male head to the
