TP-Link TL-SC3230N, User Manual

Page: 23 / 94

15
Step2: Enable UPnP NAT traversal option of the camera
Refer to Setting Î Network Î UPnP page for detail NAT traversal setting. Note that this option
is enabled by default.
4.4 Access the camera from the Internet Explorer for the first time
1. Start the web browser on the computer and type the IP address of the camera you want to
monitor as below:
2. The Login Window of the camera is prompted. Type in your login name and password under
“User name” and “Password” textbox. For the first time use (default value), input the User
Name:
admin and Password: admin . Click OK button to start the main menu.
3. According to your browser’s security setting, the IE Web Page may prompt the “Security
Warning” window. If so, select “Yes” to install and run the ActiveX control into your PC.
Otherwise, the system will load the ActiveX silently.
4. After the ActiveX control was installed and run, the first image will be displayed.