TD-W8960NB
300Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-19
4.4.2.3 ATM-EoA-Bridging
If you want to adopt the
Bridge
service and you need to use an ATM Interface, follow the steps
below to add a WAN service over a selected ATM interface:
1. Add a new ATM interface and select
EoA
option for DSL Link Type (see
4.4.1.1 ATM
interface
).
2. Click
the
Add
button on the screen Figure 4-7. Select WAN Service Interface over ATM PVC
on the next screen (as shown Figure 4-8).
3. Select
Bridging
option for the
WAN service type
on the screen (as shown Figure 4-9), and
click
Next
button to continue.
4. On the screen (as shown Figure 4-13) you will see the detailed settings you’ve made. Please
click the
Apply/Save
button to save these settings.
4.4.2.4 ATM-PPPoA
If your ISP provides a
PPPoA
connection and you need to use an ATM Interface, follow the steps
below to add a WAN service over a selected ATM interface:
1. Add a new ATM interface and select
PPPoA
option for DSL Link Type (see
4.4.1.1 ATM
interface
).
2. Click
the
Add
button on the screen Figure 4-7 and the next configuration is similar to
PPPoE
,
(see section
4.4.2.1 ATM-EoA-PPPoE
)
. The difference is that you don’t need to set the
PPPoE Service Name
and
Bridge PPPoE Frames Between WAN and Local Ports
on the
screen of Figure 4-10.
27
