TD-W8960NB
300Mbps Wireless N ADSL2+ Modem Router User Guide
4. I want to build a WEB Server on the LAN, what should I do?
Log in to the Router, click the “
Advanced Setup
-
NAT
” menu on the left of your browser, and click
the "
Virtual Servers
" submenu. On the "
Virtual Servers
" page, click
Add New
, then on the “
Add
or Modify a Virtual Server
” page, enter use “80” as service port, and your IP address next to the
“
Server IP Address
”, assuming 192.168.1.188 for an example, and remember to click the
Save/Apply
button.
)
Note:
Because the WEB Server port 80 will interfere with the WEB management port 80 on the Router,
you will be prompt to change the WEB management port number to avoid interference.
5. The wireless stations cannot connect to the Router.
1) Make sure the "
Enable Wireless Router Radio
" is checked.
2) Make sure that the wireless stations' SSID accord with the Router's SSID.
3) Make sure the wireless stations have right KEY for encryption when the Router is encrypted.
4) If the wireless connection is ready, but you can’t access the Router, check the IP Address of
your wireless stations.
94
