TD-W8950N
150M bps Wireless N ADSL2+ M odem Router User Guide
26
Static IP Address on the screen of Figure 4-15, and the Static IP Address for DNS Server on
the screen of Figure 4-18.
4.4.2.6 ETH-PPPoE
If your ISP provides a
PPPoE
connection and you need to use an
ETH
Interface, follow the steps
below to add a WAN service over a selected ETH interface:
1. Add a new
ETH
2. Click the
Add
button on the screen Figure 4-7 and the following configuration is similar to
PPPoE
over ATM interface
(see section
).
4.4.2.7 ETH-IPoE
If your ISP provides an
IPoE
connection and you want to use an
ETH
Interface, follow the steps
below to add a WAN service over a selected ETH interface:
1. Add a new
ETH
interface on the screen of
2. Click the
Add
button on the screen Figure 4-7 and the next configuration is similar to
IPoE
over ATM interface
(see section
).
4.4.2.8 ETH-Bridge
If you want to adopt the
Bridge
service and you need to use an
ETH
Interface, follow the steps
below to add a WAN service over a selected ETH interface:
1. Add a new
ETH
2. Click the
Add
button on the screen Figure 4-7 and the next configuration is similar to
Bridge
over ATM interface
(see section
).
4.4.3 MAC Clone
Choose menu “
Advanced Setup
”
“
M AC Clone
”, you can configure the MAC address of the
WAN Interface as shown below.
The WAN Interface List displays the Lay2 Interfaces you have configured on the section
and its default MAC Address. If you have not configured corresponding WAN
Service for the interface on the section
, the blank for MAC Address will display
“Need a corresponding WAN Service”.
The last one of WAN Interface List displays your PC’s current address.
Figure 4-20
Type the new value for the WAN Interface whose MAC Address you want to change.
You can select corresponding WAN Interface from the drop-down list and click
Clone
button to
clone your current PC MAC.
