TD-W8950N
150M bps Wireless N ADSL2+ M odem Router User Guide
21
Figure 4-13
8. On the next screen you will see the WAN Port Information Table with the new configuration.
Figure 4-14
Remove:
Select the check box in the table above and then click
Remove
, the corresponding
interface will be deleted.
4.4.2.2 ATM -EoA-IPoE
If your ISP provides an
IPoE
connection and you need to use an ATM Interface, follow the steps
below to add a WAN service over a selected ATM interface:
1. Add a
new
ATM interface (
2. Click the
Add
button on the screen (as shown Figure 4-7). Select WAN Service Interface over
ATM PVC on the next screen (as shown Figure 4-8).
3. If your ISP provides an IPoE connection, select
IP over Ethernet
option for the
WAN service
type
on the screen (as shown Figure 4-9), and click
Next
button to continue.
4. Enter parameters in the following blanks to configure the WAN IP Address and click
Next
.
