TD-W8910G
54M Wireless ADSL2+ Router User Guide
70
¾
Refresh:
Click the button, the information in the table will be updated.
¾
Close:
Click the button, the screen will be closed.
To Configure the System Log Settings:
Click the
Configure System Log
button (shown in Figure 5-69), you will see the screen below
(shown in Figure 5-71).
Figure 5-71
¾
Disable/Enable:
Select the
Enable
to log the events, if you don’t want to log these events,
please select
Disable
.
¾
Log Level:
Select the Log level in the drop-down list, for the Log level, all events above or
equal to the selected level will be logged.
¾
Display Level:
Select the Display level in the drop-down list, for the Display Level, all logged
events above or equal to the selected level will be displayed.
¾
Mode:
Select the mode to record the events. If the selected mode is
Local,
events will be
recorded in the local memory. If the selected mode is
Remote
, events will be sent to the
specified IP address and UDP port of the remote system log server. If the selected mode is
Both
, events will be sent to the local memory and the remote system log server.
¾
Server IP Address:
Type the address of the server you want to record the events.
¾
Server UDP Port:
Type the UDP Port of the server.
5.7.3 Internet Time
Choose “
Management
”
Æ
“
Internet Time
”, you can see the Time settings screen, this screen
(shown in Figure 5-72) allows you to set the time for the Router.
