TD-W8910G
54M Wireless ADSL2+ Router User Guide
33
in.
External Port Start:
The base number of External Ports. You can type a service port or
leave it blank.
External Port End:
The end number of External Ports. You can type a service port or
leave it blank.
Protocol:
The protocol used for this application,
TCP
,
UDP
, or
TCP/UDP
.
Internal Port Start:
The base number of Internal Ports. You can type a service port or
leave it blank.
Internal Port End:
The end number of Internal Ports. You can type a service port or
leave it blank.
Server IP Address:
The IP Address of the PC providing the service application.
¾
Add:
Click the
Add
button to add a new entry.
¾
Remove:
Select the check box in the table (shown in Figure 5-16) and then click the
Remove
button, then the corresponding entry will be deleted in the table.
To setup a virtual server entry:
1. Click
the
Add
button on the screen above (pop-up Figure 5-16), and then you will set the
new Virtual Server in the next screen (shown in Figure 5-17).
