MR0-WR941N/MR0-WR941ND
Wireless N Router
- 41 -
3010-3030.
¾
Incoming Protocol -
The protocol used for Incoming Ports Range, either TCP or UDP, or
ALL (all protocols supported by the router).
¾
Status -
The status of this entry either
Enabled
or
Disabled
.
To add a new rule, enter the following data on the
Port Triggering
screen.
1. Click
the
Add New button
(pop-up Figure 4-27).
2. Enter a port number used by the application when it generates an outgoing request.
3. Select the protocol used for
Trigger Port
from the pull-down list, either
TCP
,
UDP
, or
All.
4. Enter the range of port numbers used by the remote system when it responds to the PC's
request.
5. Select the protocol used for
Incoming Ports Range
from the pull-down list, either
TCP
or
UDP
, or
All.
6. Select
the
Enable
checkbox to enable.
7. Click
the
Save
button to save the new rule.
Figure 4-27 Add or Modify a Triggering Entry
There are many popular applications in the
Popular Application
list. You can select it, and the
application will fill in the
Trigger Port
,
incoming Ports Range
boxes and select the
Enable
checkbox. It has the same effect as adding a new rule.
To modify or delete an existing entry:
1. Click
the
Modify
in the entry you want to modify. If you want to delete the entry, click the
Delete
.
2. Modify the information.
3. Click
the
Save
button.
Click the
Enable All
button to make all entries enabled
