MR0-WR941N/MR0-WR941ND
Wireless N Router
- 39 -
¾
IP Address -
The IP Address of the PC providing the service application.
¾
Protocol -
The protocol used for this application, either
TCP
,
UDP
, or
All
(all protocols
supported by the router).
¾
Status -
The status of this entry either
Enabled
or
Disabled
.
To setup a virtual server entry:
1. Click
the
Add New button
. (pop-up Figure 4-25)
2. Select the service you want to use from the Common Service Port list. If the
Common
Service Port
list does not have the service that you want to use, type the number of the
service port or service port range in the
Service Port
box.
3. Type the IP Address of the computer in the
Server IP Address
box.
4. Select the protocol used for this application, either
TCP
or
UDP
, or
All
.
5. Select
the
Enable
check box to enable the virtual server.
6. Click
the
Save
button.
Figure 4-25 Add or Modify a Virtual Server Entry
)
Note:
If your computer or server has more than one type of available service, please select another
service, and enter the same IP Address for that computer or server.
To modify or delete an existing entry:
1. Click
the
Modify
in the entry you want to modify. If you want to delete the entry, click the
Delete
.
2. Modify the information.
3. Click
the
Save
button.
Click the
Enable/ Disabled All
button to make all entries enabled/ disabled.
Click the
Delete All
button to delete all entries.
