MR0-WR941N/MR0-WR941ND
Wireless N Router
- 13 -
¾
Region
- Select your region from the pull-down list. This field specifies the region where the
wireless function of the router can be used. It may be illegal to use the wireless function of
the router in a region other than one of those specified in this field. If your country or region
is not listed, please contact your local government agency for assistance.
)
Note:
Limited by local law regulations, version for North America does not have region selection option.
¾
Channel -
This field determines which operating frequency will be used. The default channel
is set to 6. It is not necessary to change the wireless channel unless you notice interference
problems with another nearby access point
¾
Channel width -
Select any channel width from the pull-down list. The default setting is
automatic, which can adjust the channel width for your clients automatically.
These settings are only for basic wireless parameters. For advanced settings, please refer to
Section 4.5: "Wireless."
5. Click the
Next
button. You will then see the Finish page:
Figure 3-10 Quick Setup - Finish
After finishing all configurations of basic network parameters, please click
Finish
button to exit
this
Quick Setup
.
