4
Figure 2-1 Install an interface card (1)
3.
Hold the fastening screws on the front panel of the
interface card, and gently push the interface card in along
the slot guide rail until the interface card is flush with the
switch, as shown in Figure 2-2.
Figure 2-2 Install an interface card (2)
4.
Tighten the captive screws with a Phillips screwdriver to fix
the interface card in place.
•
Removing the Interface Card
1.
Wear an ESD-preventive wrist strap, and make sure that it
has good skin contact and is well grounded.
