manualshive.com logo in svg

TP-Link JetStream TL-SL5428E, User Manual

The TP-Link JetStream TL-SL5428E, an advanced network switch, offers exceptional performance and versatility for your networking needs. Seamlessly connect multiple devices with ease and efficiency. Access the comprehensive user manual for this product, available for free download at manualshive.com, to maximize your experience and unleash the switch's full potential.

Share
Download
background image

 

65

 

click the 

Create

 button to create a VLAN. Enter the VLAN ID and 

the description for the VLAN. Meanwhile, specify its member 
ports.  

3 

Create MAC VLAN. 

Required.  On  the 

VLAN

→

MAC VLAN

 page, create the MAC 

VLAN. For the device in a MAC VLAN, it’s required to set its 
connected port of switch to be a member of this VLAN so as to 
ensure the normal communication.   

4  Select your desired 

ports for MAC VLAN 
feature.  

Required. On the 

VLAN

→

MAC VLAN

→

Port Enable

 page, 

select and enable the desired ports for MAC VLAN feature. 

8.3  Protocol VLAN 

Protocol VLAN is another way to classify VLANs basing on network protocol. Protocol VLANs can 
be sorted by IP, IPX, DECnet, AppleTalk, Banyan and so on. Through the Protocol VLANs, the 
broadcast domain can span over multiple switches and the Host can change its physical position 
in the network with its VLAN member role always effective. By creating Protocol VLANs, the 
network administrator can manage the network clients basing on their actual applications and 
services effectively.   

This switch can classify VLANs basing on the common protocol types listed in the following table. 

Please create the Protocol VLAN to your actual need.   

Protocol Type 

Type value 

ARP 0x0806 

IP 0x0800 

MPLS 0x8847/0x8848 

IPX 0x8137 

IS-IS 0x8000 

LACP 0x8809 

802.1X 0x888E 

Table 8-2 Protocol types in common use 

The packet in Protocol VLAN is processed in the following way: 

1.  When receiving an untagged packet, the switch matches the packet with the current Protocol 

VLAN. If the packet is matched, the switch will add a corresponding Protocol VLAN tag to it. If 

no Protocol VLAN is matched, the switch will add a tag to the packet according to the PVID of 

the received port. Thus, the packet is assigned automatically to the corresponding VLAN for 

transmission.  

2.  When receiving tagged packet, the switch will process it basing on the 802.1Q VLAN. If the 

received port is the member of the VLAN to which the tagged packet belongs, the packet will 

be forwarded normally. Otherwise, the packet will be discarded. 

3.  If the Protocol VLAN is created, please set its enabled port to be the member of 

corresponding 802.1Q VLAN so as to ensure the packets forwarded normally. 

Summary of Contents for JetStream TL-SL5428E



























































































































































































































































Reviews:

No comments

Related manuals for JetStream TL-SL5428E

Accedian Skylight LX Installation Manual preview
Skylight LX
Brand: Accedian Pages: 2
IBM E12 Quick Installation Manual preview
E12
Brand: IBM Pages: 2
Qlogic SANbox 5802V Supplementary Manual preview
SANbox 5802V
Brand: Qlogic Pages: 4
AVE 8PSWT Specification preview
8PSWT
Brand: AVE Pages: 2
Delta Electronics SK1027 Specifications preview
SK1027
Brand: Delta Electronics Pages: 1
Black Box SW1046A Manual preview
SW1046A
Brand: Black Box Pages: 28
N-Tron 708M12 User Manual & Installation Manual preview
708M12
Brand: N-Tron Pages: 169
Eaton Moeller IZM Series Quick Start Manual preview
Moeller IZM Series
Brand: Eaton Pages: 4
FeinTech VMS02400 Instruction Manual preview
VMS02400
Brand: FeinTech Pages: 22
Zamel stiro RWS-211D/N Manual preview
stiro RWS-211D/N
Brand: Zamel Pages: 11
Foxtel FX04241 Quick Install Manual preview
FX04241
Brand: Foxtel Pages: 9
N-audio 8X7 User Manual preview
8X7
Brand: N-audio Pages: 8
IOGear MiniView G-CS12 Owner'S Manual preview
MiniView G-CS12
Brand: IOGear Pages: 18
Transition Networks LAN MASTER 33022.B User Manual preview
LAN MASTER 33022.B
Brand: Transition Networks Pages: 12
Kramer WP-211X Quick Start Manual preview
WP-211X
Brand: Kramer Pages: 3
UNICOM MicroGST/5 GEP-32005T User Manual preview
MicroGST/5 GEP-32005T
Brand: UNICOM Pages: 12
Dwyer Instruments L8-WP FLOTECT Installation And Operating Instructions preview
L8-WP FLOTECT
Brand: Dwyer Instruments Pages: 2
Mo-vis Twister Pro User Manual preview
Twister Pro
Brand: Mo-vis Pages: 109

Brands by name

Popular brands

Load more brands