7
+ Supports Telnet, CLI, SNMP v1/v2c/v3, RMON and web access.
+ Port Mirroring enables monitoring selected ingress/egress traffic.
2.3 Appearance
Description
2.3.1 Front Panel
Figure 2-1 Front Panel
The following parts are located on the front panel of the Switch:
¾
10/100Mbps Ports:
Designed to connect to the device with a bandwidth of 10Mbps or
100Mbps. Each has a corresponding 10/100Mbps LED.
¾
10/100/1000Mbps Ports:
Designed to connect to the device with a bandwidth of 10Mbps,
100Mbps or 1000Mbps. Each has a corresponding 1000Mbps LED.
¾
SFP Ports:
Designed to install the SFP module. SFP1 shares the same LED with Port 27 and
SFP shares the same LED with Port 28.
¾
Console Port:
Designed to connect with the serial port of a computer or terminal for monitoring
and configuring the Switch.
¾
LEDs
Name
Status
Indication
On
Power is on.
Flashing
Power supply is abnormal.
PWR
Off
Power is off or power supply is abnormal.
On
The Switch is working abnormally.
Flashing
The Switch is working normally.
SYS
Off
The Switch is working abnormally.
On
A device is linked to the corresponding port.
Flashing
Data is being transmitted or received.
Green
The linked device is running at 100Mbps.
10/100Mb
ps
Yellow
The linked device is running at 10Mbps.
On
A device is linked to the corresponding port.
Flashing
Data is being transmitted or received.
Green
The linked device is running at 1000Mbps.
1000Mbp
s
Yellow
The linked device is running at 10/100Mbps.
