45
Priority will be considered as the preferred one. If the two port priorities are equal; the port with
smaller port number is preferred.
On this page, you can configure the LACP feature of the switch.
Choose the menu
Switching
→
LAG
→
LACP Config
to load the following page.
Figure 7-7 LACP Config
The following entries are displayed on this screen:
¾
Global Config
LACP:
Enable/Disable the LACP feature here.
¾
LACP Config
Port Select:
Click the Select
button to quick-select the corresponding port based
on the port number you entered.
Select:
Select the desired port for LACP configuration. It is multi-optional.
Port:
Displays the port number.
Admin Key:
Specify an Admin Key for the port. The member ports in a dynamic
aggregation group must have the same Admin Key.
System Priority:
Specify a System Priority for the port. The System Priority and the
