Time:
Specify the device’s time. Select the number from the drop-down
list in time format HH/MM/SS.
NTP Server I/NTP
Server II:
Please input the primary NTP sever address and an alternative NTP
server address.
Configuration Management
In this section, you can backup, restore, reset or reboot your CAP.
Figure 6-6 Configuration Management
Backup:
Click
Backup
to save a copy of your current settings. Please save
your copy in a secure file location. It is recommended to back up the
settings before you change the configurations and upgrade the
firmware.
Restore:
Click Browse to locate and select the backup file, then click Restore
to import the file to recover the configurations.
Factory Restore:
Click
Reset
to restore your device to its factory default settings.
Reboot:
Click
Reboot
to reboot your device. Do NOT power off your device
while it is rebooting.
Firmware Upgrade
to download the latest system file. Click
Browse
to
locate and select the firmware file. Click
Upload
to upload the file to upgrade.
Figure 6-7 Firmware Upgrade
After the firmware is uploaded, the page below will be shown. If you want to save the
current settings, please click
Save Configuration
. If you want to restore the device to
factory defaults please click
Restore
.
25
