Network
On
Network
page, you can configure the wireless MAC filtering rule and set the VLANs.
Figure 5-1 Network Page
If you have made any change of the parameters, please click
OK
to make the
configuration take effect. There will be a blue bar at the top of the page to remind you to
save the configuration. Click
Save
when you finish all settings, otherwise all the settings
will be recovered to last saved settings at reboot or power off.
Wireless MAC Filtering
Wireless MAC Filtering feature uses MAC addresses to determine whether one host can
access the wireless network or not. Thereby it can effectively control the user access in
the wireless network.
Figure 5-2 Wireless MAC Filtering
Wireless MAC
Filtering:
Check the box and select one or more wireless networks to enable the
wireless MAC filtering on the selected wireless network(s). With MAC
filtering enabled, only MAC addresses listed in the rule list can be
connected to the corresponding wireless network.
Click
Add
to create a wireless MAC filtering entry. The following page will be shown.
19
