Figure 4-7 WDS Settings
Manually
You should manually enter the parameters of the root AP. Click
OK
to finish the settings.
WDS:
Check the box to enable WDS feature.
SSID:
The SSID of the AP your device is going to connect to as a client.
BSSID:
The BSSID of the AP your device is going to connect to as a client.
Security Mode:
This option should be chosen according to the AP's security
configuration. It is recommended that the security type is the same as
your AP's security type.
Select the encryption type, including
None
and
WPA-PSK/WPA2-PSK
.
The default setting is
None
Advanced Settings
You can configure the advanced settings in this section. Improper configuration would
degrade the CAP’s wireless performance. With no special requirement, it is
recommended to keep the default settings.
Figure 4-8 Advanced Settings
Wireless Mode:
Select the protocol standard for the wireless network.
16
