![background image](http://html.mh-extra.com/html/tp-link/archer-c5/archer-c5_user-manual_1144256086.webp)
Archer C5
AC1200 Wireless Dual Band Gigabit Router
- 76 -
IP Address
- The IP address of the PC running the service application.
Protocol
- The protocol used for this application, either
TCP
,
UDP
, or
All
(all protocols
supported by the router).
Status
- The status of this entry, "Enabled" means the virtual server entry is enabled.
Common Service Port
- Some common services already exist in the drop-down list.
Modify
- To modify or delete an existing entry.
To setup a virtual server entry:
1. Click the
Add New...
button. (pop-up Figure 4-67)
2. Select the service you want to use from the
Common Service Port
list. If the
Common
Service Port
menu does not list the service that you want to use, enter the number of the
service port or service port range in the
Service Port
field.
3. Enter the IP address of the computer running the service application in the
IP Address
field.
4. Select the protocol used for this application in the
Protocol
drop-down list, either
TCP
,
UDP
,
or
All
.
5. Select the
Enabled
option in the
Status
drop-down list.
6. Click the
Save
button.
Figure 4-67 Add or Modify a Virtual Server Entry
Note:
It is possible that you have a computer or server that has more than one type of available service.
If so, select another service, and type the same IP address for that computer or server.
To modify or delete an existing entry:
1. Find the desired entry in the table.
2. Click
Modify
or
Delete
as desired on the
Modify
column.