TP-Link Archer AX80 User Manual Download Page 100

Page: 100 / 140

Chapter 15

Customize Your Network Settings

3. Enable

Link Aggregation

Note:

Link Aggregation and IPTV/VLAN cannot be enabled at the same time to avoid LAN port conflicts.

4. Select the

Static LAG

LACP

mode. It’s recommended that you select the same link

aggregation mode for both ends of the link.

5. Click

SAVE

. The LAN2 and LAN3 ports will be used for Link Aggregation.

15 4 Configure to Support IPTV Service

I want to:

Configure IPTV setup to enable Internet/IPTV/Phone service provided by my internet
service provider (ISP).

How can I do that?

Visit

http://tplinkwifi.net

, and log in with your TP-Link ID or the password you set for

the router.

Go to

Advanced

Network

IPTV/VLAN

3 If your ISP provides the networking service based on IGMP technology

, e.g., British

Telecom(BT) and Talk Talk in UK:
1 ) Tick the

IGMP Proxy

and

IGMP Snooping

checkbox, then select the

IGMP Version

either V2 or V3, as required by your ISP.

2 ) Click

SAVE

Summary of Contents for Archer AX80













































































































































Search results

Summary of Contents for Archer AX80

Reviews:

Related manuals for Archer AX80

Brands by name

Popular brands

TP-Link Archer AX80, User Manual

Search results

Summary of Contents for Archer AX80

Reviews:

Related manuals for Archer AX80

Brands by name

Popular brands