Toyotomi MUL12- FWCA, Service Manual

Page: 22 / 49

22
CONTROL
3 REMOTE CONTROLLER
3.1 Wired Remote Controller
3.1.1 Wired Controller XK19
,WLVRSWLRQDOIRUWKHFDVVHWWHW\SHZDOOPRXQWHGDQGÀRRUFHLOLQJLQGRRUXQLWV
Outside View of the Wired Controller
Outside View of the Wired Controller
LCD of the Wired Controller
LCD of the Wired Controller
No. Symbols Description
1 Swing function.
2 Sleep function (3 types: sleep 1,sleep2 and sleep 3).
3 Running modes of the indoor unit (Cooling, Dry, Fan and Heating).
4 Defrosting function for the outdoor unit.
5 Gate-control function (this function is yet unavailable for this unit).
6 Lock function.
7 High, middle, low or auto fan speed of the indoor unit.
8 SHIELD Shield functions (buttons, temperature, On/Off, Mode or Save is shielded or Save is shielded by the remote monitor.
9 TURBO Turbo function.
10 MEMORY Memory function (The indoor unit resumes the original setting state after power failure and then power recovery).
11 MASTER Master wired controller (this function is yet unavailable for this unit).
12 It blinks under on state of the unit without operation of any button.
13 SAVE Energy-saving function.
14 Ambient/preset temperature value.
15 E-HEATER Electric auxiliary heating function.
16 BLOW Blow function.
17 Timing value.
18 QUITE Quiet function (two types: quiet and auto quiet).
19 SET It will be displayed under the debugging mode.