background image

7

Before using heater, familiarize yourself with the following operating controls and part names.

SECTION D:

OPERATING CONTROLS AND PART NAMES

Exhaust outlet

Air inlet

Air filter

19. Circulation fan

Rear cover (left)

Pipe stopper

21. Power supply cord

Rear cover (right)

Rear cover (upper)

20. Room

temperature sensor

Operation panel

Front panel

Louver

Red float release button

Fuel strainer

(inside)

Drip tray

Circulation

fan motor

2. AUTO button

6. CLEAR button

15. Day of the week indicator

4. Set TEMP/TIMER/CLOCK/DAY

7. Temperature select ˚F/˚C

3. TIMER button

10. TIMER indicator

9. AUTO indicator

18. AM/PM indicator

17. WIFi LED

16. ON/OFF TIMER indicator

13. BURNING MODE indicator

11. POWER SAVER indicator

12. CHILD LOCK indicator

14. ˚F/˚C indicator

1. ON/OFF button

5. POWER SAVER/

CHILD LOCK button

8. ON lamp

1. ON/OFF button

2. AUTO button 

3. TIMER button 

4. SET button

5. POWER SAVER/CHILD LOCK button 

6. CLEAR button 

7. Temperature select °F/°C

8. ON lamp 

9. AUTO indicator 

10. TIMER indicator 

11. POWER SAVER indicator 

12. CHILD LOCK indicator 

13. BURNING MODE indicator 

14. °F/°C indicator 

15. Day of the week indicator 

16. ON/OFF TIMER indicator 

17. WiFi LED 

18. AM/PM indicator 

19. Circulation fan 

20. Room temperature sensor 

21. Power supply code 

Main button switch turns heater on and off. When 
switched on, heater begins operation and combustion 
starts after preheat period.

The button turns weekly timer operation modes on 
and off which have been programmed into weekly 
timer.

The button turns weekly timer set mode on and off.

To set TIME/TEMP/WEEKLY TIMER/and Day of 
weekly.

The button turns POWER SAVER operation mode on 
and off. Press and hold the button, the to turn on or 
off the CHILD LOCK mode.

When reset the program for weekly timer, the CLEAR 
button is used.

°F/°C toggle switch.

Lit - Heater is in operation.
Flashing - Pre-heating and pre-purging.

Lit - Weekly timer operation is in use.

Lit - Weekly timer setting mode.

Lit - Operating weekly timer set mode.

Lit- Heater operating in CHILD LOCK mode.

Lit - Heater operating at high, medium or low 
combustion.

Lit - Display shows current temp.
Flashing - Current temp can be changed.

Lit - Display shows current day or timer day.

Lit - Display ON/OFF timer.

Lit - The heater in WiFi mode.

Lit - Display shows current time.
Flashing - Current time can be changed.

Three speed motor supplies high - capacity warm air 
flow during high combustion for quickly heating up a 
room, and low or medium-capacity warm air flow 
during low or medium combustion for maintaining 
comfortable room temperature.

Constantly senses room temperature and supplies 
information to heater so that desired room 
temperature can be maintained.

For use in 120 volts AC electrical outlet.

Summary of Contents for Laser 531





































Reviews: