Fig. 16: Connecting Hand-Held Tester To DLC3
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
Turn the ignition switch ON and push the hand-held tester main switch ON.
Select the ACTIVE TEST mode on the hand-held tester.
HINT:
Please refer to the hand-held tester operator's manual for further details.
If you have no hand-held tester, connect the battery's positive (+) and negative (-) leads to the
fuel pump connector (see
FUEL PUMP
).
2. Check that there is no leak from any parts of the fuel system.
3. Turn the ignition switch OFF.
4. Disconnect the hand-held tester from the DLC3.
NOTE:
Do not start the engine.
2004 Toyota RAV4
2004 ENGINE PERFORMANCE SFI - RAV4
Microsoft
Tuesday, July 21, 2009 4:18:50 PM
Page 18
© 2005 Mitchell Repair Information Company, LLC.
