Fig. 67: Connecting Hand-Held Tester To DLC3
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
1. Connect the hand-held tester to the DLC3.
2. Connect the battery negative (-) terminal cable to the battery.
3. Turn the ignition switch ON and push the hand-held tester main switch ON.
4. Select the ACTIVE TEST mode on the hand-held tester.
HINT:
Please refer to the hand-held tester operator's manual for further details.
If you have no hand-held tester, connect the positive (+) and negative (-) leads from the
battery to the fuel pump connector (see
FUEL PUMP
).
i. Connect the battery to the injector with SST (wire) for 15 seconds, and measure the injection
NOTE:
Do not start the engine.
2004 Toyota RAV4
2004 ENGINE PERFORMANCE SFI - RAV4
Microsoft
Tuesday, July 21, 2009 4:18:51 PM
Page 70
© 2005 Mitchell Repair Information Company, LLC.