Toyota PT296-00170 Owner'S Manual Download

Page: 87 / 164

4. WHAT TO DO IF...



In other situations

Symptom

Likely cause

Solution

Page

Cellular

phone

This

system

Despite all
efforts the
symptom status
does not
change.

The cellular phone is not
close enough to this
system.

Manually connect
the cellular phone
you wish to use to
this system.

Radio interference has
occurred.

Turn off Wi-Fi

devices or other
devices that may
emit radio waves.

The cellular phone is
the most likely cause of
the symptom.

Turn the cellular
phone off, remove
and reinstall the
battery pack. Then
restart the cellular
phone. (In case the
cellular phone does
not have a
removable battery,
RESET the cellular
phone)

Enable the cellular
phone’s Bluetooth

connection.

Disable the Wi-Fi

connection of the
cellular

phone.

Stop the cellular
phone’s security
software and close
all applications.

Before using an
application installed
on the cellular
phone, carefully
check its source and
how its operation
might affect this
system.

∗

: For details, refer to the owner’s manual that came with the cellular phone.

Summary of Contents for PT296-00170





































































































































































Search results

Summary of Contents for PT296-00170

Reviews:

Related manuals for PT296-00170

Brands by name

Popular brands

Toyota PT296-00170, Owner'S Manual

Search results

Summary of Contents for PT296-00170

Reviews:

Related manuals for PT296-00170

Brands by name

Popular brands