Toyota PT296-00170 Owner'S Manual Download

Page: 161 / 164

1. VOICE COMMAND SYSTEM OPERATION

VOICE COMMAND SYSTEM

OPERATION

Press the

button.



The voice command system is activated.



Press the talk switch to stop the

currently played prompt and skip to the

next dialog step.



In case of an activated speech

recognizer waiting for input, press the

talk switch to restart the speech

recognizer. (The recognizer drops the

previous input and waits for new input

from the user.)

After a beep sounds, say the desired

command or touch the desired

command.

DISPLAYING THE COMMAND

LIST SCREEN

Say

“More commands”

or touch

“More commands”

on the voice

command main menu screen.

Say the desired command or select the

desired command from the list.



The command list is read out and the

corresponding

command

highlighted. To cancel this function,
press and hold the

button or press

any other button.

161

Summary of Contents for PT296-00170





































































































































































Search results

Summary of Contents for PT296-00170

Reviews:

Related manuals for PT296-00170

Brands by name

Popular brands

Toyota PT296-00170, Owner'S Manual

Search results

Summary of Contents for PT296-00170

Reviews:

Related manuals for PT296-00170

Brands by name

Popular brands