Toyota PT296-00170 Owner'S Manual Download

Page: 98 / 164

1. SETUP OPERATION



1. SETUP OPERATION



If the automatic connection failed, the
following screen will be displayed.
Select the desired profile to be
connected.



Once you have connected the Bluetooth

device, it is automatically connected
whenever the ignition is in the following
status.



Vehicles without smart entry & start

system

The ignition is turned to the “ACC” or
“ON” position.



Vehicles with smart entry & start system

The ignition is turned to ACCESSORY or
IGNITION ON mode.

INFORMATION



For details on device detection and the

operation of your Bluetooth

device, see

the manual that comes with your

Bluetooth

device.



The music profiles the paired device
supports can be connected individually as
desired. Some devices do not allow
individual profiles to be connected. In that
case, a pop-up window is displayed

No.

Function

Select to connect the phone profile.

Select to connect the music profile.

Select to connect all supported
profiles.

Summary of Contents for PT296-00170





































































































































































Search results

Summary of Contents for PT296-00170

Reviews:

Related manuals for PT296-00170

Brands by name

Popular brands

Toyota PT296-00170, Owner'S Manual

Search results

Summary of Contents for PT296-00170

Reviews:

Related manuals for PT296-00170

Brands by name

Popular brands