1. AUDIO SYSTEM OPERATION
3. MEDIA OPERATION
I
Message
Display conditions
Corrective action
“Bluetooth music device
not connected for Aha.
Would you like to configure
one now? (iPhone requires
USB connection)”
Aha connection cannot be
initiated.
Please connect a phone to the
system. For an Android phone,
connect to Bluetooth Audio.
For an iPhone, connect its
dock connector to USB cable
to USB port.
“Connection to Aha is lost.
Please reconnect the
phone when the vehicle is
safely stopped.”
Aha connection is lost.
For an Android phone, please
make sure it is connected for
Bluetooth Audio. For an
iPhone, please make sure the
USB connection is good.
“Action not available”
An invalid action was
performed that is not
supported for the content.
Please try a valid action for the
content. Supported actions can
vary by station.
“Please log into Aha”
The user credentials are not
valid or unable to authenticate
from the handset to Aha.
Please confirm if the correct
user credentials were entered
and could successfully logged
into the Aha account on the
phone.
“Please make sure you
have the latest version of
Aha”
The version of Aha on the
phone is not supported by the
Premium Audio software.
Please download the latest
version of Aha to the phone.
“Loading”
Loading the contents from the
server / the cellular network
signal is too low to stream
data faster.
Please lot into your Aha
account. If already logged in,
then the cellular network signal
might be too low. Please try to
reconnect after some time.
“Could not relaunch Aha
client”
Could not start the Aha client
on the phone.
Please log into your Aha
account and try again starting
Aha on the phone.
IF A MESSAGE APPEARS ON THE SCREEN
If a problem occurs when starting up Aha, a message will appear on the
screen. Referring to the table below to identify the problem, take the
recommended corrective action.
48
