Toyota Prius Prime 2020 Manual Download Page 691

Page: 691 / 792

691

8-2. Steps to take in an emergency

PRIUS PRIME_OM_OM47C77U_(U)

Wh
en tro

uble

ris

■

If the tire is inflated to more than the specified air pressure

Disconnect the hose from the valve.

Disconnect the hose from the valve, remove the air release cap from

the hose and then reconnect the hose.
Turn the compressor switch on and wait for several seconds, and then

turn it off. Check that the air pressure indicator shows the specified air

pressure. (



P. 725)

If the air pressure is under the designated pressure, turn the compres-

sor switch on again and repeat the inflation procedure until the speci-

fied air pressure is reached.

■

The valve of a tire that has been repaired

After a tire is repaired with the emergency tire puncture repair kit, the

valve should be replaced.

■

After a tire is repaired with the emergency tire puncture repair kit

●

The tire pressure warning valve and transmitter should be replaced.

●

Even if the tire inflation pressure is at the recommended level, the tire

pressure warning light may come on/flash.

■

Note for checking the emergency tire puncture repair kit

Check the sealant expiry date occasionally.

The expiry date is shown on the bottle. Do not use sealant whose expiry

date has already passed. Otherwise, repairs conducted using the emer-

gency tire puncture repair kit may not be performed properly.

Install the air release cap to the end of

the hose and push the protrusion on

the air release cap into the tire valve

to let some air out.

Summary of Contents for Prius Prime 2020

























































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Prius Prime 2020

Reviews:

Related manuals for Prius Prime 2020

Brands by name

Popular brands

Toyota Prius Prime 2020, Manual

Search results

Summary of Contents for Prius Prime 2020

Reviews:

Related manuals for Prius Prime 2020

Brands by name

Popular brands