Toyota Prius Prime 2020 Manual Download Page 693

Page: 693 / 792

693

8-2. Steps to take in an emergency

PRIUS PRIME_OM_OM47C77U_(U)

Wh
en tro

uble

ris

WARNING

■

Do not drive the vehicle with a flat tire

Do not continue driving with a flat tire.

Driving even a short distance with a flat tire can damage the tire and the

wheel beyond repair.
Driving with a flat tire may cause a circumferential groove on the side

wall. In such a case, the tire may explode when using a repair kit.

■

Caution while driving

●

Store the repair kit in the luggage compartment.

Injuries may result in the event of an accident or sudden braking.

●

The repair kit is exclusively only for your vehicle.

Do not use repair kit on other vehicles, which could lead to an accident

causing death or serious injury.

●

Do not use repair kit for tires that are different size than the original

ones, or for any other purpose. If the tires have not been completely

repaired, it could lead to an accident causing death or serious injury.

■

Precautions for use of the sealant

●

Ingesting the sealant is hazardous to your health. If you ingest sealant,

consume as much water as possible, and then immediately consult a

doctor.

●

If sealant gets in eyes or adheres to skin, immediately wash it off with

water. If discomfort persists, consult a doctor.

Summary of Contents for Prius Prime 2020

























































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Prius Prime 2020

Reviews:

Related manuals for Prius Prime 2020

Brands by name

Popular brands

Toyota Prius Prime 2020, Manual

Search results

Summary of Contents for Prius Prime 2020

Reviews:

Related manuals for Prius Prime 2020

Brands by name

Popular brands