Toyota Prius Prime 2020 Manual Download Page 385

Page: 385 / 792

PRIUS PRIME_OM_OM47C77U_(U)

385

5-5. Using the driving support systems

Drivin

■

Enabling/disabling the pre-collision system

The pre-collision system can be enabled/disabled on the
screen (



P. 244) of the multi-information display.

The system is automatically enabled each time the power switch is
turned to ON mode.

If the system is disabled, the
PCS warning light will turn on.

■

Changing the pre-collision warning timing

The pre-collision warning timing can be changed on the
screen (



P. 244) of the multi-information display.

The operation timing setting is retained when the power switch is turned
off.

Far

The warning will begin to oper-
ate earlier than with the default
timing.

Middle

This is the default setting.

Near

The warning will begin to oper-
ate later than with the default
timing.

Changing settings of the pre-collision system

Summary of Contents for Prius Prime 2020

























































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Prius Prime 2020

Reviews:

Related manuals for Prius Prime 2020

Brands by name

Popular brands

Toyota Prius Prime 2020, Manual

Search results

Summary of Contents for Prius Prime 2020

Reviews:

Related manuals for Prius Prime 2020

Brands by name

Popular brands