TOYOTA /PRIUS DUAL PLAYER HEADREST VIDEO
Page 6 of 15
D. Mount control box
1. Make all connections to the control box using
color coded connections including antenna and
power harness. (Figure D1)
2. Adhere the foam tape to the control box as
shown in the picture. Do not wrap around the
control box. (Figure D2)
3. Place the control box in the void area where
the two inside kick panels were removed. Use
the overhanging foam tape too secure the
control box too the floor. (Figure D3)
E. Install headrest cables
1. Slide the front seat all the way back. With the
headrest cable draped outside the console
area, feed cable end 3A (Red / White) below
the carpet from the console box area below the
driver side seat. Exit the opening in the carpet
behind the front inside seat support.
(Figure E1a,E1b)
Figure
D1
Figure
D2
Figure
D3
Figure
E1a
Figure
E1b
Southeast Toyota Distributors, LLC
