TOYOTA /PRIUS DUAL PLAYER HEADREST VIDEO
Page 10 of 15
7. Wrap foam tape around each cable clamp.
(Figure F7)
8. Secure cable to the factory wiring below the
seat with 4 wire ties as indicated in the picture.
(Figure F8)
9. Verify motion of seat travel. Check that
cables are clear of seat tracks and that they
move freely with the seat without any stress.
10. Repeat steps 1-9 with cables # 1B, # 2B,
and # 3B on the passenger side seat.
11.
Trim all wire ties used throughout installation
flush with a pair of wire cutters
.
Figure
F7
Figure
F8
Southeast Toyota Distributors, LLC
