TOYOTA 4RUNNER
2020 –
DASH CAMERA
PROCEDURE
Page 13 of 24
Issue D: 11/06/19
q.
Route the Dash Camera wire
through the IP opening and
secure using 2 Wire Ties (#3,
#4) as shown.
NOTE:
Do not secure to the
vehicle drain tube if equipped.
3. Wire Harness Installation.
a.
Wrap the Wire Harness Ground
Wire starting from the Ground
Terminal using 2 (25x200mm)
pieces of Vinyl sheet with a
10mm overlap in between,
and secure with electrical tape
closed (spiral wrap).
Side Cutters
Fig. 2-10
Tape Measure/Ruler, Scissors
Fig. 3-1
Ground Wire
390mm
10mm
Overlap
Ground Terminal
Side Cutters
Fig. 2-9
1
2
p.
Route the Dash Camera wire
along and behind the vehicle
harness, then secure using
2 vehicle harness clips and 2
Wire Ties (#1, #2).
•
Rotate the Wire Tie Ratchet away
from the A-pillar cover.
NOTE:
Do not secure Dash
Camera wire to the Curtain Side
Air Bag or pass wire across the
Curtain Side Airbag.
NOTE:
Do not secure to the
vehicle drain tube if equipped.
4
3
2
4
