Toyota LAND CRUISER 2002 Manual Download Page 70

Page: 70 / 123

UN115

2. Touch either the left or right arrow to

correct the direction of the current ve-

hicle position mark on the road.

Touch the

”Enter”

switch

on the screen

and the map screen returns.

Distance

The distance calibration function is to be

used when the tires are replaced. This

will adjust for any possible change in tire

circumference from the old tires to the

new ones. If this procedure is not per-

formed when tires are replaced, the cur-

rent vehicle position mark may become

incorrect.

To execute the fast distance tire calibration
procedure, touch the

”Distance”

switch

on the System Option screen.

UN116

The above message appears and the fast

distance calibration is automatically started.

A few seconds later, the map screen returns.

Summary of Contents for LAND CRUISER 2002




























































































































Search results

Summary of Contents for LAND CRUISER 2002

Reviews:

Related manuals for LAND CRUISER 2002

Brands by name

Popular brands

Toyota LAND CRUISER 2002, Manual

Search results

Summary of Contents for LAND CRUISER 2002

Reviews:

Related manuals for LAND CRUISER 2002

Brands by name

Popular brands