Toyota LAND CRUISER 2002 Manual Download Page 30

Page: 30 / 123

Voice route guidance is offered automati-

cally during route guidance. Use voice

guidance just for your reference.

You can adjust the volume of the voice or turn

off voice guidance.

UN043

Push the

”MENU”

button on the bezel to

display the menu screen. Then touch any

number at the bottom of the screen to se-

lect the desired volume. If you do not
need voice guidance, touch the

”OFF”

switch.

The selected item is highlighted in green.

You can listen to ”Voice route guidance” by
pushing the

”MAP/VOICE”

button on the

bezel, even if the volume is ”OFF”.

INFORMATION

During route guidance, the voice guid-

ance continues even if the navigation

screen is changed to other screens,

such as the audio screen.

UN301

The voice guidance provides various mes-

sages as you approach an intersection, or

other point where you need to maneuver the

vehicle.

”Proceed about 5 miles to the T

−

intersection.”

”In a quarter of a mile, right turn at

the T

−

intersection.”

”At the T

−

intersection, right turn.”

Beep sound only

Voice guidance

Typical voice guidance prompts

Summary of Contents for LAND CRUISER 2002




























































































































Search results

Summary of Contents for LAND CRUISER 2002

Reviews:

Related manuals for LAND CRUISER 2002

Brands by name

Popular brands

Toyota LAND CRUISER 2002, Manual

Search results

Summary of Contents for LAND CRUISER 2002

Reviews:

Related manuals for LAND CRUISER 2002

Brands by name

Popular brands